Lbl-lighting MO Direct Feed Standoff for Canopy Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting MO Direct Feed Standoff for Canopy. LBL Lighting MO Direct Feed Standoff for Canopy User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Installation Instructions for
Rigid Standoff
980MRLSPPFC
1
Install the Rigid Standoffs
ANCHOR
GP I :ENERAL RODUCT NFORMATION
This product is suitable for indoor dry locations only.
This product is intended to be used with LBL direct power feed
canopies and Monorail system only.
Select a location on the ceiling where the Monorail is to be
mounted.
One way of marking the standoff locations on the ceiling is to
lay the Monorail on the floor underneath of the selected
location and by using a plumb bob pointing on the center of
the Monorail, mark the points on the ceiling.
The other way is to hold the Monorail directly against the
ceiling and mark the standoff points on the ceiling.
Tap the anchors at the marked points up to the threaded
portion with a hammer.
Screw the anchors in the rest of the way with a Phillips
screwdriver.
Insert the #8 screw into the threaded nipple and washer.
Tighten the #8 screw completely into the anchor to secure the
washer and threaded nipple.
Repeat step 4 through 6 for the remaining standoffs.
ANCHOR
WASHER
#8 SCREW
THREADED NIPPLE
CAUTION: This standoff is not applicable with
vaulted ceilings.
CEILING
Monorail
1.2
HANGERDIR_
1A
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWERTO THE
ELECTRICAL BOX OFF.
1B
1C
1
2
3
4
5
6
7
4
6
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Rigid Standoff

Installation Instructions forRigid Standoff980MRLSPPFC1Install the Rigid StandoffsANCHORGP I :ENERAL RODUCT NFORMATIONThis product is suitable for ind

Page 2 - SAVETHESE INSTRUCTIONS!

Remove the housing cap on all standoffs.HOUSING CAPPlace a section of the Monorail into standoff housings.While supporting the Monorail, tighten the h

Commentaires sur ces manuels

Pas de commentaire