Lbl-lighting 2-Circuit MO Rigid Standoff Manuel d'utilisateur télécharger pdf (Page 3)

Install the 2-Circuit Monorail

Remove the housing cap on all standoffs.

HOUSING CAP

Place a section of the Monorail into standoff housings.

While supporting the Monorail, tighten the housing cap

completely to the standoff housings to secure the

Monorail in place.

Repeat these steps for each standoff.

MONORAIL

Adjust Standoff Height (Optional)

Slightly loosen the M3 set screw on the(Do Not Remove)

side of the telescoping post with th 1.5 MM Allen wrench

provided.

Adjust standoff height and tighten M3 set screw with 1.5 MM

Allen wrench.

Repeat these steps for each standoff.

TELESCOPING POST

M3 SET

SCREW

1.5MM ALLEN

WRENCH

NOTE: In case of cross threading, loosen the cap and

repeat step 3.

STANDOFF HOUSING

HOUSING CAP

4A 1A

1A5B

1 2 3 4

Pas de commentaire

Lbl-lighting 2-Circuit MO Rigid Standoff Manuel d'utilisateur Page 3