Lbl-lighting LED Illum MO 4" Round Dual Feed Canopy Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting LED Illum MO 4" Round Dual Feed Canopy. LBL Lighting LED Illum MO 4" Round Dual Feed Canopy User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Installation Instructions for
4" Flexible Power Feed Canopy
980MRLA4PFC-LED
1
1.1
REMOTECNPY-_-LED
GP I :ENERAL RODUCT NFORMATION
This product is suitable for indoor dry locations only.
Minimum volume of the electrical box must be 6 cubic inches
(98 cubic centimeter).
Adjust the Fixture Height
LED-Illuminated Monorail
Strip the last 4” of the coaxial outer mesh to expose the inner
insulated wire.
Slide the metal sleeve down the wire to the edge of the coaxial
cable.
The overall fixture height (H) is measured from top of the
canopy to the bottom of the power feed. Leave an additional
4” of the coaxial cable for connecting to power.
Once the height is determined, cut the excess coaxial cable.
(H)
POWER FEED
HOUSING
NOTE: It is recommended to adjust the power feed
height before installing the canopy.
CANOPY
INNER WIRE
COAXIAL CABLE
4”
METAL SLEEVE
1A
1
2
3
4
1A 1A1B
4
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Adjust the Fixture Height

Installation Instructions for4" Flexible Power Feed Canopy980MRLA4PFC-LED11.1REMOTECNPY-_-LEDGP I :ENERAL RODUCT NFORMATIONThis product is suitab

Page 2 - Install the Power Feed Canopy

2Feed the coaxial cable up and into the canopy post.Slide the metal sleeve up into the canopy post and secure bytightening the M4 set screw with the p

Page 3

3Install the LED-Illuminated Monorailto the Power Feed CanopyRemove the power feed cap from the power feed housing.Completely back out the screw on th

Page 4 - SAVETHESE INSTRUCTIONS!

4POWERFEED CAPSCREWTighten the screw on the power feed cap for proper powerconnection.For dual power feed canopies: Repeat steps 1-5 for the secondpow

Commentaires sur ces manuels

Pas de commentaire