Lbl-lighting Icicle P Manuel d'utilisateur télécharger pdf

THUMB

SCREW

Installation Instructions for

Icicle

1.2

HS277_

980FSJICCP

Install the Lamp & Shade

LAMP

SOCKET

Use Watt,Type XelogenMAX 35

(Xenon) Bi-Pin Lamp.

Push the lamp pins completely into the socket holes.

NOTE: To reduce the risk of a burn or electric shock

during relamping, disconnect the power to the fixture.

NOTE: Use only your fingers and soft cloth to replace

the lamp.

WARNING: RISK OF FIRE

Never replace a Xenon (Xelogen) lamp with a regular

Halogen lamp.A regular Halogen lamp requires a protective

glass shield.

Remove the three thumb screws.

GLASS SHADE

THUMB SCREW

BRACKET POST

Place the glass shade completely into the bracket post and

tighten the three thumb screws to secure the glass shade in

place.

NOTE:

Do not over tighten the thumb screw which may

cause the glass shade to break.

GP I :ENERAL RODUCT NFORMATION

This product is ETL listed and suitable only for indoor dry locations

and approved for use at any height above the finished floor.

Fusion Jack™

1 2 3 4

Résumé du contenu

Page 1 - Install the Lamp & Shade

THUMBSCREWInstallation Instructions forIcicle1.2HS277_980FSJICCP1Install the Lamp & Shade1LAMPSOCKETUse Watt,Type XelogenMAX 35(Xenon) Bi-Pin Lamp

Page 2 - Adjust the Fixture Height

Adjust the Fixture Height2Back out (do not remove) the set screw on tip of theconnector with the provided Allen wrench.Back out (do not remove) the se

Page 3

22HFirmly tighten the set screw on the conical connector.1010Pull the coaxial cable toward the fixture to smooth thewrinkles.2I1111

Page 4 - SAVETHESE INSTRUCTIONS!

Commentaires sur ces manuels

Pas de commentaire

Lbl-lighting Icicle P Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting Icicle P. LBL Lighting Icicle P User Manual [de] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Lbl-lighting Icicle P