Lbl-lighting Coliseum P Manuel d'utilisateur télécharger pdf

GENERAL PRODUCT INFORMATION:

This product is ETL listed and suitable only for indoor dry locations

and approved for use at any height above the finished floor.

CAUTION - RISK OF FIRE

This product requires installation by a qualified

electrician. Before installing be sure to read all

instructions and TURN THE POWER TO THE

ELECTRICAL BOX OFF.

Fusion Jack™

Adjust the Fixture Height

Installation Instructions for

1.1

Coliseum

HS511_

980FSJCOLISP

Adjust the Fixture Height

Back out (do not remove) the set screw on tip of the

connector with the provided Allen wrench.

Back out (do not remove) the set screw on the conical

connector with the provided Allen wrench.

SET SCREW

ALLEN WRENCH

Tap the conical connector on a hard surface with the set screw

facing down, so the plate inside drops into place.

SURFACE

Cut the coaxial cable to the desired length.

Gently twist the end of the coaxial cable between thumb and

forefinger.

PLATE

SET SCREW

ALLEN WRENCH

CONNECTOR

1 2 3 4

Résumé du contenu

Page 1 - Coliseum

GENERAL PRODUCT INFORMATION:This product is ETL listed and suitable only for indoor dry locations and approved for use at any height above the finishe

Page 2

21E6Feed and push the coaxial cable into the conical connector. The coaxial cable will come to a stop point after being inserted 3/4" into the co

Page 3 - Install the Lamp

3Install the LampSHADENOTE: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture.Lift the glass shade

Page 4 - SAVE THESE INSTRUCTIONS!

Commentaires sur ces manuels

Pas de commentaire

Lbl-lighting Coliseum P Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting Coliseum P. LBL Lighting Coliseum P User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Lbl-lighting Coliseum P