Lbl-lighting Onyx Teardrop Manuel d'utilisateur télécharger pdf (Page 2)

Place the fixture canopy onto the backplate. Level the fixture

vertically and tighten the two M3 set screws with the 1.5MM

Allen wrench to secure the fixture in place.

CANOPY

M3 SET SCREW

1.5MM ALLEN WRENCH

Line up two backplate holes with the electrical box holes.

Mount the backplate to the electrical box with the two #8-32

screws provided.

Connect the green wire to a suitable ground in accordance

with local electrical codes.

BACKPLATE

ELECTRICAL BOX HOLE

#8-32 SCREW

Connect the white fixture wire to the neutral power line wire

with a wire nut.

Connect the black fixture wire to the hot power line wire with

a wire nut.

Place all wires and wire nut connections inside the electrical

box.

1 2 3 4

Pas de commentaire

Lbl-lighting Onyx Teardrop Manuel d'utilisateur Page 2