Lbl-lighting Omni Medium Manuel d'utilisateur télécharger pdf

Outdoor

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

1B1A

Installation Instructions for

Medium Omni

1.0

JW561, JW564

980OMNIMWO

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can mount to either a 4" square electrical box with

round plaster ring or an octagon electrical box.

This product can be dimmed with a standard incandescent dimmer.

Remove the eight cap screws around the perimeter of the cover.

Lift the cover off the fixture body.

Prepare the Fixture for Installation

Remove the six screws on the reflector.

Lift the reflector out of the fixture body.

3 3

1 2 3 4

Résumé du contenu

Page 1 - Medium Omni

OutdoorCAUTION - RISK OF FIREThis product must be installed in accordance withthe applicable installation code by a person familiarwith the constructi

Page 2 - Install the Fixture

2D2C2B3456782Install the anchor for the lag bolt at the point marked on thewall.For wet locations: Apply a thick bead of caulk around theanchor point

Page 3 - MAX 60120 Watt

2F2E3B3A3Connect the white wire to the neutral power line wire.Connect the black wire to the hot power line wire.Reinstall the reflector into the hous

Page 4 - SAVETHESE INSTRUCTIONS!

4A12344Install the Decorative Shade (Optional)DECORATIVESHADESUPPORT ARMSUPPORT ARMALLEN WRENCHUse the Allen wrench to remove the upper shade support