Lbl-lighting Veneto Grande Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting Veneto Grande. LBL Lighting Veneto Grande User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Installation Instructions for
Veneto Grande Ceiling
1.4
JC318_2D100
980VENETGC
Ceiling
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
1
Install the Fixture
Place the button head screw and washer from the inside
through one of the canopy holes.
Place the narrow side hole of the shoe horn bracket onto the
exposed button head screw.
Finger tighten the cap nut completely to the button head
screw to secure the shoe horn bracket in place.
NOTE: There will be a small gap between the shoe horn
bracket and canopy when the cap nut is completely
tighten to button head screw.This gap is necessary when
attaching the glass shade to shoe horn brackets.
Repeat step 1 through 3 for the other two shoe horn brackets.
CAP NUT
SHOE HORN BRACKET
WASHER
BUTTON
HEAD SCREW
Mount the crossbar to the electrical box with the two #8-32
screws.
#8-32 SCREW
CROSSBAR
ELECTRICAL
BOX
1B
1A
2
1
2
3
4
5
3
1
4
5
5
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Veneto Grande Ceiling

Installation Instructions forVeneto Grande Ceiling1.4JC318_2D100980VENETGCCeilingCAUTION - RISK OF FIREThis product must be installed in accordance wi

Page 2 - MAX 100120

1C2Connect the fixture green wire to the ground in accordancewith local electrical codes.Connect the fixture white wire to neutral power line wire wit

Page 3

3CAP SCREWScrew the female end of the three hook extensions onto thethree cap screws.Screw the male end of the three hook extensions onto thethree hoo

Page 4 - SAVETHESE INSTRUCTIONS!

4SAVETHESE INSTRUCTIONS!7400 Linder Ave, Skokie, IL 60077800.323.3226 - 847.626.6300www.lbllighting.com© 2008 LBL Lighting.All rights reserved.The &

Commentaires sur ces manuels

Pas de commentaire