Lbl-lighting LED Pendants Manuel d'utilisateur télécharger pdf

Installation Instructions for

LED Pendants

980FSJLEDP

Adjust the Fixture Height

SOCKET ASSEMBLY

FIXTURE COAXIAL

CABLE

GP I :ENERAL RODUCT NFORMATION

This product is ETL listed and suitable only for indoor dry locations

and approved for use at any height above the finished floor.

(H)

Fusion Jack™

1.2

Fusion Jack LED Pendants

Feed the fixture coaxial cable through the glass shade. Slide the

glass shade down the cord and rest it onto the socket

assembly.

Cut the coaxial cable to the desired length.

SET SCREW

Back out (do not remove) the set screw on tip of the

connector with the provided Allen wrench.

ALLEN WRENCH

Back out (do not remove) the set screw on the conical

connector with the provided Allen wrench.

SET SCREW

ALLEN WRENCH

CONNECTOR

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

1 2 3 4

Résumé du contenu

Page 1 - LED Pendants

Installation Instructions forLED Pendants980FSJLEDPAdjust the Fixture HeightSOCKET ASSEMBLYFIXTURE COAXIALCABLE1GP I :ENERAL RODUCT NFORMATIONThis pro

Page 2

21DGently twist the end of the coaxial cable between thumb andforefinger.55Tap the conical connector on a hard surface with the set screwfacing down,

Page 3 - Replacing the Lamp

3Replacing the LampIf necessary, slide the stem up.Lift the shade up to expose the socket.Lower the shade onto the socket assembly.If necessary, slide

Page 4 - SAVE THESE INSTRUCTIONS!

Commentaires sur ces manuels

Pas de commentaire

Lbl-lighting LED Pendants Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Lbl-lighting LED Pendants. LBL Lighting LED Pendants User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Lbl-lighting LED Pendants